Get 3% Off Online Orders When You Use Promo Code FILL
These Clamps Are Built Using A High Quality 304 Stainless Strap. These Are Most Commonly Used On Wire Reinforced Hoses That Need A High Amount Of Pressure To Seal Properly. They Are Also Nice When You Are Building A Custom Project Where Visual Looks Are An Important Factor. When A Worm Drive Clamp Is Just Not Enough; Get It Super Tight With These T Bolt Clamps! Just View The Guide Below And Select From The Part Numbers Above. SEE OUR RELATED HOSES AND ACCESSORIES BELOW.
| Part Number | Minimum Diameter | Max Diameter | Fits Our Hose Size |
| 32749 | 1.375 | 1.562 | 1" & 1-1/8" |
| 32750 | 1.5" | 1.625" | 1-1/4" |
| 32751 | 1.62 | 1.87 | 1-3/8" |
| 32752 | 1.75" | 2.00" | 1-3/8" & 1-1/2" |
| 32753 | 1.87 | 2.18 | 1-5/8 *** |
| 32754 | 2" | 2.31" | 1-5/8" & 1-3/4" |
| 32755 | 2.12" | 2.43" | 1-7/8" |
| 32756 | 2.25" | 2.56" | 2" |
| 32757 | 2.37" | 2.69" | 2" & 2-1/8" |
| 32758 | 2.5" | 2.81" | 2-1/4" & 2-1/2" |
| Material | Polished Stainless Steel. |
| Band/Bridge | 19mm or 3/4" Width/ 201/301 stainless steel. |
| Band Thickness | 0.7mm or .027. |
| Bolt Type | .25" - 28 Male Pipe Thread / 1/4" - 28 plated steel. |
| Nut Size | .4375" Hex-Head / (7/16" or 11mm) hex, Self Locking Nut.nylon insert, plated steel locknu |
| Recommended Torque | 75 (in/lbs) |
| NOTES | Very Good For Use With Hard Wall / Wire Reinforced Hoses. |
| Inches To mm Calculator | to easily convert inches to mm (CLICK HERE) |
This is the second time I have bought from this company and I've been very happy with products and services. They sell some pretty stuff here better than the junk I find locally, that's if I can find it.thanks for the excellent product and service.
to big for the hose, says it fits the hose but cant get it tight enough on the nipple
Very pleased with the quality of the product. If your looking for the best possible clamps for your filler install, you can’t go wrong with these.
sized per chart given on the hose order and wouldn't fit....
These thick clamps are great when you need to be sure you hose will stay on for the life of the car. In some cases filler necks have to be cut and you have no bead, so this clamp has extra piece of mind. Certainly worth it!
Works great
these are a must have using hardwall hose,they dont strip out like the others when you tighen. everyone says to use 2 worm style clamps but just one of these is more than enough
