Southco 21° Degree Aluminum Fuel Door And Housing

When you need a combination housing with Diesel Fill and DEF Fill; You will not find a better option. Features no holes so you can choose which side you want each fill neck on. Use A hole saw bits and drill your own installation holes. Manufactured of Cast aluminum. Features a hinged gas door & high quality twist latch. Comes in a 22° Degree Angle. See All Photos. Made In The U.S.A
Features	Hinged Gas Door with Twist Latch
Neck Offset Angle:	22° Degrees
Filler Neck Hole Opening Diameter:	Drill Your Own - 2-1/2" recommended
Diesel Exhaust Fluid Hole Diameter:	Drill Your Own - recommended 1-5/8"
Inside Housing Dimensions:	8-1/4" Wide X 5-1/2" Tall.
Surface Flange Outer Dimensions:	11-3/4" Wide X 7-3/4" Tall
Minimum Hole Size Needed For Install:	9-1/4" Wide X 6-1/4" Tall
Finish:	Ball Burnished Inner W/ Polished Exterior Flange.
Flange Thickness:	1-3/16"
Depth:	4-1/4" Deep From Front To Back at Deepest Point
Material:	Cast Aluminum
Note:	Will Require Modification Here are some places you can purchase hole saw bits Fill Neck Size - 2-3/8" CLICK HERE Diesel Exhaust Neck Size - 1-5/8" CLICK HERE
RELATED PRODUCTS:	SEE MORE USEFUL ITEMS AT THE BOTTOM OF THIS PAGE!

When you need a combination housing with Diesel Fill and DEF Fill; You will not find a better option. Features no holes so you can choose which side you want each fill neck on. Use A hole saw bits and drill your own installation holes. Manufactured of Cast aluminum. Features a hinged gas door & high quality twist latch. Comes in a 22° Degree Angle. See All Photos. Made In The U.S.A

Features

Hinged Gas Door with Twist Latch

Neck Offset Angle:

22° Degrees

Filler Neck Hole Opening Diameter:

Drill Your Own - 2-1/2" recommended

Diesel Exhaust Fluid Hole Diameter:

Drill Your Own - recommended 1-5/8"

Inside Housing Dimensions:

8-1/4" Wide X 5-1/2" Tall.

Surface Flange Outer Dimensions:

11-3/4" Wide X 7-3/4" Tall

Minimum Hole Size Needed For Install:

9-1/4" Wide X 6-1/4" Tall

Finish:

Ball Burnished Inner W/ Polished Exterior Flange.

Flange Thickness:

1-3/16"

Depth:

4-1/4" Deep From Front To Back at Deepest Point

Material:

Cast Aluminum

Note:

Will Require Modification

Here are some places you can purchase hole saw bits

Fill Neck Size - 2-3/8" CLICK HERE

Diesel Exhaust Neck Size - 1-5/8" CLICK HERE

RELATED PRODUCTS:

SEE MORE USEFUL ITEMS AT THE BOTTOM OF THIS PAGE!