Get 3% Off Online Orders When You Use Promo Code FILL
Build Your Own Fuel Neck Hose Kit - 1-1/4" to 1" Reducing Hose 45°
€28.90
(No reviews yet)
Write a Review
- Part #
- D125A45XB01
- Condition:
- New
- Shipping:
- Add to Cart For Quote
- Bulk Pricing:
- Buy in bulk and save
- Buy 5 - 10 and pay only €20.21 each
- Buy 11 - 25 and pay only €18.28 each
- Buy 26 - 75 and pay only €16.35 each
- Buy 76 - 250 and pay only €14.42 each
- WARNING:
- This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
- Handling Time:
- Usually Ships Same Or Next Business Day
Below are the available bulk discount rates for each individual item when you purchase a certain amount
This Kit Is Used to Fabricate your own fuel fill hose for many models of GM automobile Equipped with 1-1/4" Tank Fitting and 1" to 1-1/4" Neck.
Cut this hose down to match your current hose and angle and use the reducer to adapt to you application.
Spec= Rubber 45 Degree Elbow and 1-1/4" to 1" ID reducer. PN# B01 (If you have a 1-1/8" Filler Neck use ID reducer B07)
Inside Diameter: 1-1/4" Or 1 Inch using included Reducer
Overall Hose Length:
SAE= 15"X15" inch. Total 30"
Metric= 736mm
Material:=Nitrile Buna Gasoline Grade Rubber.
Maximum Pressure(psi)=20 psi
1 YEAR
