fuel filler hose
Bought a RV, Had a straight filler hose bent on a 90' angle. Purchased this filler hose and a connector which fixed the slow fill problem. Hose seems to match OEM thickness and I feel confident it will last a resenable time.
Below are the available bulk discount rates for each individual item when you purchase a certain amount
Angle: | 90 Degree. |
Inside Diameter: | 2" or 51mm |
Total Length: | 32" (16"x16") |
Inner Material: | Nitrile Buna (NBR) Inner Tube. |
Outer Material: | (CSM) Outer Cover. |
Reinforcement: | Spiral Nylon Cord. |
Maximum Pressure:(psi) | 20psi |
Fuel Types: | Gasoline, Diesel, Bio Diesel, Gasohol, Oil. |
Temperature Rating: | -40°F to +212°F (-40°C to +100°C). |
Applications: | Fuel Filler Neck, Oil Neck, |
Specification: | Built To Meet SAE30R6 |
Notes: | Us As Is Or Trim Ends To Fit, This Elbow Is Over Twice as Long As The Industry Standard |
Related Expansion Joiners: | CLICK HERE |
RELATED PRODUCTS: | SEE OTHER RELATED ITEMS AT THE BOTTOM OF THIS WEB PAGE!! |
Bought a RV, Had a straight filler hose bent on a 90' angle. Purchased this filler hose and a connector which fixed the slow fill problem. Hose seems to match OEM thickness and I feel confident it will last a resenable time.
Fast shipping and ready to be installed.
A+
This hose is just what I needed to replace the filler neck hose on a Volvo 142. Nobody else had a hose that worked.
Product received exactly as expected. Dimension and quality.
Used for a custom application moving a gas filler to the inside bed of a 64 Ranchero. Worked great!
The only 90 degree hose available with longer legs. Worked perfectly with out having to splice in a bunch of couplings and clamps.
reveived in short order and installed the next day. Fit was perfect and I only had to cut one end off of one piece. Was done with task in about 45 minutes.
Now if everything else I work on would go that fast.
I searched a lot of sites. The price of this item was half of every other place I checked.
Delivery was fast and the hose appears to be good quality. It is long enough to be custom cut.
The cut off can be used for straight pipe connections later.