Perfect Fit
Needed to add some length to the filler neck in my Bronco after a body lift and I found fillernecksupply.com.
These pieces are a perfect fit!
While Wire Reinforced Fuel Filler Hose Is The Most Flexible; It Does Not Expand and Contract Over Beaded Fittings Well.
To Solve This Problem; Use This Joiner To Attach Soft Wall Ends To Your Hard Wall Hose.
STEPS:
1) Use Our Hard To Soft Wall Joiner Part Number CPL225H2S To Connect This Soft Wall End To Your Hard Wall Hose
2) Insert This End Connector Over The Beaded End Of Joiner.
3) Attach This Soft Wall End Connector To Fuel Tank And / Or Filler Neck.
4) Finish Using T Bolt Clamps To Ensure A Proper Tight Connection.
Inner Diameter | 2-1/4" |
Length | 3" |
Matierial | NBR Tube With CSM Rubber Cover. |
Finish | Smooth |
Wall Thickness | 1/4" |
Note | Hard Wall and Wire Reinforced Hose Is The Same Thing. |
Needed to add some length to the filler neck in my Bronco after a body lift and I found fillernecksupply.com.
These pieces are a perfect fit!
Works well
Will order from you again. Thanks
The product came in quick and was a perfect fit. So perfect that it was hard to install, but that is what you want where fuel is concerned.
Outstanding !