Get 3% Off Online Orders When You Use Promo Code FILL
Below are the available bulk discount rates for each individual item when you purchase a certain amount
| MAKE | MODEL | YEAR RANGE | ENGINE | SUB MODEL | NOTES |
| Ford | Ranger | 1993 1994 1995 1996 1997 | 2.3L, 3.0L, 4.0L | XL, S, Plus, Sport, STX, XLT, | 6' Foot / 72" Inch Long Fleetside / Regular Bed Only, 108" & 125" Wheel Base. |
| Mazda | B2300, B3000, B4000 | 1993 1994 1995 1996 1997 | 2.3L, 3.0L, 4.0L | 6' Foot / 72" Inch Long Fleetside / Regular Bed Only. 108" & 125" Wheel Base. |
| Material | CSM / Hapalon Cover with NBR Inner Tubing. |
| Includes | Outer Hose. |
| Reinforcement | Spiral Wrapped Nylon Cord (Within Wall). |
| Inner Tube Type | Not Included (Most of the time you can use your original inner hose). |
| Length | 22" End To End (Down Center Line). |
| Main Tube Diameter | 2"ID At Neck and 2-1/4"ID At Tank End. |
| Vent Type | Internal Venting. |
| Condition | New |
| Replaces OEM#S | AL5Z9034A |
| NOTE: | 1993-1997 EXTENDED AND REGULAR CABS 6-Ft / 72" FLEET-SIDE BED ONLY. 108" & 125" Wheel Base. |
| RELATED ITEM | Upper Filler Neck Section. (CLICK HERE) |
The hose was thick and pliable, it appeared to be very good quality.The fit was perfect. It only took 20 minutes to disassemble and reassemble the filler neck once it was removed from the tank. It was a challenge to replace the hose back on the tank side. I added a bit of lubricant and it slid on in seconds.. should have done that first instead of trying to fight with it to get it on…Very happy with the results so far.
yes this is the best hose i have found for a reasonable price, the fit is perfect, used spray lube to help slide inner hose thru and then a bit of oil to twist on the ends. 4th time doing this, other cheap hoses dont last, this one looks like it may last awhile
shipping was faster than expected
I priced this from several vendors and yours was the best price for the part that actually fits. Auto zone sold me the wrong one.
I priced this from several vendors and yours was the best price for the part that actually fits. Auto zone sold me the wrong one.
Perfect fit. Exactly what I needed for my 96 Extended Cab, 3.0 engine, Ranger with 6’ fleetside bed. But I agree with other reviewer, would have liked some instruction on how to get inner hose inside filler hose properly. Great part though!
It was a perfect fit
ONLY SOURCE THAT HAD THIS PART
Delivered promptly. Hose appears to fit correctly, will know better once I have started using the truck. The original hose came with the clamp incorporated in the large end of the hose, this one doesn't, hopefully it's not an issue.
